#8010 9" Ford Small Pinion Driveshaft RPM Monitor Kit
Kit includes: pick-up, cable assembly, trigger collar, and mounting bracket.
Price: $139.95
#8015 9" Ford Large Pinion Driveshaft RPM Monitor Kit
Kit includes: pick-up, cable assembly, trigger collar, and mounting bracket.
Price: $139.95
#8020 Universal Driveshaft RPM Monitor Kit
Kit includes: pick-up, 2 magnets and cable assembly only. Trigger collar and mounting bracket must be supplied by customer. (Not Shown)
Price: $79.95
#8021 Universal Input Shaft RPM Monitor Kit
Kit includes: pick-up, 1 magnets and cable assembly only. Trigger collar and mounting bracket must be supplied by customer. (Not Shown)
Price: $99.95
#8023 -33 to +15 inches of mercury Vacuum Monitor Kit
Kit includes stainless steel transducer and cable assembly.
Price: $229.95
#8025 0 - 24 psi Pressure Monitoring Kit
Kit includes stainless steel pressure transducer and cable assembly. Compatible with most gases and fluids, including gasoline, methanol, oil, etc. Price: $229.95
#8030 0 - 120 psi Pressure Monitoring Kit
Kit includes stainless steel pressure transducer and cable assembly. Compatible with most gases and fluids, including gasoline, methanol, oil, etc.
Price: $229.95
#8031 0 - 400 psi Pressure Monitoring Kit
Kit includes stainless steel pressure transducer and cable assembly. Compatible with most gases and fluids, including gasoline, methanol, oil, etc.
Price: $229.95
#8033 0 - 1,600 psi Nitrous Pressure Monitoring Kit
Kit includes stainless steel pressure transducer and cable assembly.
Price: $229.95
#8035 Exhaust Temperature Monitoring Kit
Kit includes .125" stainless steel thermocouple, compression fitting, 10' braided stainless extension wire and connector.
Price: $99.95
#8036 Custom 8 Cylinder Thermocouple Harness
Kit includes 8 3/16” stainless steel exposed
junction thermocouples with custom length
leads, and two #8038 EGT Modules designed to
fit many popular race engines. This kit allows
for the removal of the headers without having to take out the thermocouples.
Price: $799.95
#8037 Liquid Temperature Monitoring Kit
Use to monitor any liquid temperatures, such as water, or oil.
Price: $99.95
#8038 DATAMAXX®EGT MODULE
Each DATAMAXX®EGT Module allows you to add up to
four additional temperature sensors for exhaust gas
temperature, cylinder head temperature, oil temperature,
water temperature, etc. to your DATAMAXX® Main Module.
CAN Bus wiring only requires a single four conductor
cable to connect the EGT Module to the Main Module,simplifying installation.
Price: $149.95
#8040 Single Axis 3.5 G Accelerometer
Includes accelerometer and cable assembly.
Price: $159.95
#8041 Wego II 02 sensor
Complete air/fuel ratio metering system hooks directly to your Computech data logger. Versatile tuning aid for all carbureted and fuel injected engines displays AFR to your Computech software. Easy free air calibration procedure corrects for sensor aging effects. Wide supply voltage range from 11-18 volts allows operation from battery on small engines and race vehicles without an alternator. Current drain is approx. 1 amp. Unit will work with gasoline and methanol. Kit Includes:
Wide band oxygen sensor,
Oxygen sensor interface with cable,
18 x 1.5 mm weld in nut for mounting sensor on exhaust pipe
Price: $299.95
#8042 Wego II 02 sensor Dual Kit
Complete air/fuel ratio metering system hooks directly to your Computech data logger. Versatile tuning aid for all carbureted and fuel injected engines displays AFR to your Computech software. Easy free air calibration procedure corrects for sensor aging effects. Wide supply voltage range from 11-18 volts allows operation from battery on small engines and race vehicles without an alternator. Current drain is approx. 1 amp. Unit will work with gasoline and methanol. This kit is the same as above except it will allow you to monitor two 02 sensors. Kit Includes: 2 - Wide band oxygen sensor,
Oxygen sensor interface with cable,
2 - 18 x 1.5 mm weld in nut for mounting sensor on exhaust pipe
Price: $449.95
#8043 02 Sensor Weld-In Nut
18 x 1.5 mm Weld-In Nut for mounting 02 sensor on exhaust pipe
Price: $9.95
#8044 02 Sensor Weld-In Plug
Mates with 18 x 1.5 mm weld-in nut and allows removing sensor after tuning
Price: $9.95
#8050 4500 Shock Travel Sensor -
Includes sensor, cable assembly, and mounting hardware
Price: $329.95
#8105 Replacement Magnet
Price: $3.95
#8110 Replacement Drive Shaft Pick-up
Price: $69.95
#8115 Replacement Input Shaft Pick-up
Price: $89.95
